Best IP29M Series Manuel d'installation télécharger pdf (Page 7)

Using a Phillips no. 2, remove 8 screws

retaining the pan (shaded part on

illustration beside) to the hood.

Remove the pan and set aside.

- 7 -

5. REMOVE THE FILTERS AND THE GREASE DRIP RAIL

A. Remove tape on filters. Remove filters from hood and

set aside.

NOTE: It is recommended to start with the central one.

B. Remove tape on grease drip rail (1).

Lift out grease drip rail and set aside.

HD0222

6. REMOVE THE PAN

NOTE: Do not remove the 4 screws located on the

notched parts of the pan (A on figure below).

HD0223

4. PREPARE THE BLOWER HOUSING

Detach the blower housing from the hood by removing its both retaining screws (A).

Keep the screws for further use.

Fold up its both flanges (B). The flanges must be perpendicular to the top of the

blower housing.

HD0229

HD0224

RETAINING SCREWS LOCATION

HD0238

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Pas de commentaire

Best IP29M Series Manuel d'installation Page 7