Best IP29M Series Manuel d'installation télécharger pdf (Page 6)

Remove the installation kit from inside the hood.

Make sure that the following items are included:

- Installation manual

- Accessories including:

• 3 Evolution™ hybrid baffle filters

• Shielded halogen lights (GU10 type base, 120 V, 50 W) (6 for 42” width hoods, 8 for 54” width hoods)

• Bag of parts including:

(10) steel wood screws no. 10 x 1.5’’, (10) steel washer no. 10, (6) screws no. 8 x 3/8’’ (additional screws provided)

Parts sold separately:

- Interior blower Model P6 (includes rough-in kit).

- Interior blower Model P12 (includes rough-in kit).

- In-line blower assembly ILB3, ILB6, ILB9 or ILB11 (all include transition and rough-in plate)

- Exterior blower assembly EB6, EB9, EB12 or EB15 (all include rough-in plate).

- Transitions, duct, elbows, dampers, wall and roof caps. Refer to pages 3 and 4 for a complete list of venting options and model numbers.

- Optional decorative flue cover AEIP Series, 12’’, 18”, 24” or 30” height and 42” or 54” width.

- Optional dry wall trim ATDIP Series, 42” or 54” width.

- 6 -

3. PREPARE THE INSTALLATION

2. MEASURE INSTALLATION

Dimensions for the most common installation are shown beside.

The minimum hood distance above cooktop must not be less than 30’’. A maximum of

36” above cooktop is highly recommended for best capture of cooking impurities.

Distances over 36” are at the installer and users discretion.

Since framework must be flush to ceiling, 4 decorative flue covers have been created to fit

both hood widths and different ceiling heights. Refer to table below to choose the model that

fits your needs.

If a drywall box will be built instead of installing decorative flue cover, use drywall trim to hide hood and drywall junction. Refer to table

below to find the appropriate model for your hood width.

INKLOGIC® ENABLED HOOD

This hood includes the LinkLogic system which allows communication over ordinary household electrical wiring to other LinkLogic

devices including the Broan Smart Sense Fan system. If you intend to use this hood with another LinkLogic device, follow the instructions

found in section 21 along with the instructions that come with the LinkLogic device you plan to use.

HH0084A

Framework

flush to ceiling

Standard 36”

(914 mm)

high cooktop

Minimum distance between

the hood and cooktop:

30’’ (762 mm)

Recommended maximum

distance between the hood

and cooktop: 36’’ (914 mm)

Decorative flue

cover or drywall

with trim

MINIMUM AND MAXIMUM DISTANCE

OVER COOKTOP

CAUTION

When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.

DECORATIVE FLUE COVER

8’ CEILING 9’ CEILING

DISTANCE FROM COOKTOP DISTANCE FROM COOKTOP

MODEL A (HEIGHT)WIDTH 30” 36” 30” 36”

AEIP422 12” 42” X

AEIP542 12” 54” X

AEIP428 18” 42” X

AEIP548 18” 54” X

AEIP424 24” 42” X

AEIP544 24” 54” X

AEIP420 30” 42” X

AEIP540 30” 54” X

MODEL WIDTH

ATDIP42 42”

ATDIP54 54”

NOTE: For ceilings over 9’, decorative flues are not available.

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Best IP29M Series Manuel d'installation Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Hottes de cuisine Best IP29M Series