Best IP29M Series Manuel d'installation télécharger pdf (Page 8)

- 8 -

In the ceiling material, cut-out a 28¾” x 12½” max.

opening over the installation location. Install two

supporting studs inside the cut-out at dimensions

shown beside.

7. BUILD THE FRAMEWORK

7.1 SUGGESTED FRAMEWORK FOR INSTALLATION WITH DECORATIVE FLUE COVER AEIP SERIES

7.2 SUGGESTED FRAMEWORK FOR INSTALLATION WITH DRYWALL TRIM ATDIP SERIES

HD0235A

27¼”

HD0237A

FRAMEWORK 54’’ HOOD

FRAMEWORK 42’’ HOOD

WARNING

When building framework, always follow all applicable construction codes and standards.

The framework must be sized to support the total weight of the hood. Refer to the table below for total weight of the hood, according to the

type of blower chosen.

HOOD WIDTH WITH P6 INTERIOR BLOWER WITH P12 INTERIOR BLOWER WITH IN-LINE OR EXT. BLOWER (ROUGH-IN PLATE ONLY)

42” 71 LB 84 LB 52 LB

54” 86 LB 99 LB 67 LB

28½”

12½”

max.

27”

28¾”

HD0227A

12 /

8”

Studs flush

with ceiling material

Ceiling

material

Ceiling

material

SUPPORTING STUDS

Using provided wood screws no. 10 x 1.5” and washers, assemble both mounting brackets

(included with the optional decorative flue cover) to the framework. See illustration beside.

HD0228A

Below is the suggested framework for both 42” and 54” width hoods to be installed with drywall trim ATDIP Series. Refer to the table and

illustrations below for the dimensions according to the hood width. Using provided wood screws no. 10 x 1.5” and washers, assemble

both mounting brackets (included with the optional drywall trim) to the framework.

HOOD WIDTH A WITH 5/8” DRYWALL A WITH 1/2” DRYWALL B WITH 5/8” DRYWALL B WITH 1/2” DRYWALL C

42” 11

⁄8”11

⁄8”28

⁄8” 10” MINIMUM

54” 11

⁄8”11

⁄8”40

⁄8” 10” MINIMUM

FRAMEWORK

TOP VIEW

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Best IP29M Series Manuel d'installation Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Hottes de cuisine Best IP29M Series